ITech IT-M3100 - Status:operation:ptransition <NR1; Status:questionable[:Event]; Status:questionable:condition

Status Commands
Copyright © Itech Electronic Co., Ltd. 74
STATus:OPERation:PTRansition <NR1>
This command sets the positive value of the Operation Event Register.
Syntax
STATus:OPERation:PTRansition <NR1>
Arguments
<0-65535>
Default value
Not applicable
Example
STAT:OPER:PTR 32
Query command
STATus:OPERation:PTRansition?
Returns
NR1
STATus:QUEStionable[:EVENt]?
This command queries the Questionable Event Register of the status model.
Syntax
STATus:QUEStionable[:EVENt]?
Arguments
None
Default value
Not applicable
Example
STAT:QUES?
Returns
NR1
STATus:QUEStionable:CONDition?
This command queries the Questionable Condition Register of the status model