ITech IT-M3100 - [Output:]Timer[:State]; [Output:]Timer:delay

Output Commands
Copyright © Itech Electronic Co., Ltd. 9
Returns
NR3
[OUTPut:]TIMer[:STATe]
This command sets the output timer state of the power supply.
Syntax
[OUTPut:]TIMer[:STATe] <bool>
Arguments
0|OFF|1|ON
Default value
0
Example
TIM OFF
Query command
TIMer?
Returns
0|1
[OUTPut:]TIMer:DELay
This command sets time of the output timer.
Syntax
[OUTPut:]TIMer:DELay <NRf+>
Arguments
< 1.0-86400.0>
Default value
1.0s
Example
TIMer:DELay 3600
Query command
TIM:DEL?