ITech IT-M3100 - Chapter10 Trace Commands; Trace:clear; Trace:points <NR1

Trace Commands
Copyright © Itech Electronic Co., Ltd. 59
Chapter10 Trace Commands
TRACe:CLEar
This command is used to clear reading cache. If cache is not cleared,
subsequent saving will overwrite the previous data.
Syntax
TRACe:CLEar
Arguments
None
Default value
Not applicable
Example
TRAC:CLE
Query command
None
Returns
None
TRACe:POINts <NR1>
This command is used to specify cache size.
Syntax
TRACe:POINts <NR1>
Arguments
<2-2500>|MINimum|MAXimum
Default value
1000
Example
TRAC:POIN MAX