ITech IT-M3100 - System:communicate:serial:baudrate; System:communicate:lan:dns1 <SPD

System Commands
Copyright © Itech Electronic Co., Ltd. 46
Syntax
SYSTem:COMMunicate:LAN:RESTart
Arguments
None
Default value
Not applicable
Example
SYST:COMM:LAN:REST
Query command
None
Returns
None
SYSTem:COMMunicate:SERial:BAUDrate
This command sets the baud rate of the serial port.
Syntax
SYSTem:COMMunicate:SERial:BAUDrate
Arguments
<4800|9600|19200|38400|57600|115200>
Default value
Not applicable
Example
SYST:COMM:SER:BAUD 9600
Query command
SYSTem:COMMunicate:SERial:BAUDrate?
Returns
4800|9600|19200|38400|57600|115200
SYSTem:COMMunicate:LAN:DNS1 <SPD>
This command sets DNS primary address for LAN.