ITech IT-M3100 - Fetch[:Scalar]:Power[:DC]; Measure[:Scalar]:Voltage[:DC]

Measurement Commands
Copyright © Itech Electronic Co., Ltd. 13
Syntax
MEASure[:SCALar]:POWer[:DC]?
Arguments
None
Default value
Not applicable
Example
MEAS:POW?
Returns
NRf
FETCh[:SCALar]:POWer[:DC]?
This command reads the latest power value from the sampling buffer..
Syntax
FETCh[:SCALar]:POWer[:DC]?
Arguments
None
Default value
Not applicable
Example
FETC:POW?
Returns
NRf
MEASure[:SCALar]:VOLTage[:DC]?
This command queries the newly measured voltage.
Syntax
MEASure[:SCALar]:VOLTage[:DC]?
Arguments
None