ITech IT-M3100 - Chapter3 Channel Selection Commands; Channel <NR1; Instrument[:Select] <NR1

Channel Selection Commands
Copyright © Itech Electronic Co., Ltd. 4
Chapter3 Channel Selection Commands
CHANnel <NR1>
This command selects the channel number
Syntax
CHANnel <NR1>
Arguments
1-16
Default value
Not applicable
Example
CHAN 2
Query command
CHANnel?
Returns
NR1
INSTrument[:SELect] <NR1>
This command selects the channel. The function is the same as the command
CHANnel <NR1>.
Syntax
INSTrument[:SELect] <NR1>
Arguments
1-16
Default value
Not applicable
Example
INST 2
Query command
INSTrument[:SELect]?