ITech IT-M3100 - Trace:filter[:State]

Trace Commands
Copyright © Itech Electronic Co., Ltd. 63
Arguments
None
Default value
Not applicable
Example
TRACe:DATA?
Returns
{<NR3>,<NR3>,<NR3>,<NR3>...,<NR3>}
TRACe:FILTer[:STATe]
This command enables or disables the filter.
Syntax
TRACe:FILTer[:STATe]
Arguments
<0|OFF|1|ON>
Default value
1
Example
TRAC:FILT 1
Query command
TRACe:FILTer[:STATe]?
Returns
0|1