ITech IT-M3100 - System:communicate:lan:reset; System:communicate:lan:state

System Commands
Copyright © Itech Electronic Co., Ltd. 48
Syntax
SYSTem:COMMunicate:LAN:RESTore
Arguments
None
Default value
Not applicable
Example
SYST:COMM:LAN:REST
Query command
None
Returns
None
SYSTem:COMMunicate:LAN:RESet
This command makes the LAN settings valid.
Syntax
SYSTem:COMMunicate:LAN:RESet
Arguments
None
Default value
Not applicable
Example
SYST:COMM:LAN:RES
Query command
None
Returns
None
SYSTem:COMMunicate:LAN:STATe?
This command queries the LAN state.