ITech IT-M3100 - [Source:]Voltage:slew[:Both] <Nrf+>,<Nrf; [Source:]Voltage:slew:negative <Nrf

Source Commands
Copyright © Itech Electronic Co., Ltd. 26
Arguments
<NRf+> MIN TO MAX
Default value
MIN
Example
VOLT:TRIG 10.00
Query command
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage:SLEW[:BOTH] <NRf+>,<NRf+>
This command sets the voltage rising and falling slew rate of the power supply.
Syntax
[SOURce:]VOLTage:SLEW[:BOTH] <NRf+>,<NRf+>
Arguments
<0.025-9.999>,<0.025-9.999>
Default value
0.025,0.100
Example
VOLT:SLEW 0.03,0.03
Query command
[SOURce:]VOLTage:SLEW[:BOTH]?
[MINimum|MAXimum],[MINimum|MAXimum]
Returns
<NR3>,<NR3>
[SOURce:]VOLTage:SLEW:NEGative <NRf+>
This command sets the voltage falling slew rate of the power supply.
Syntax
[SOURce:]VOLTage:SLEW:NEGative <NRf+>