ITech IT-M3100 - System:clear; System:remote

System Commands
Copyright © Itech Electronic Co., Ltd. 39
Note
⚫ “ - >” indicates the commands that you send to the IT-M3100 power supply.
⚫ “< -” indicates the response from the IT-M3100 power supply.
Returns
AARD
SYSTem:CLEar
This command clears the system status register.
Syntax
SYSTem:CLEar
Arguments
None
Default value
Not applicable
Example
SYST:CLE
Query command
None
Returns
None
SYSTem:REMote
This command takes the instrument out of front-panel control mode and
switches it to remote control mode.
Syntax
SYSTem:REMote
Arguments
None
Default value
Not applicable
Example
SYST:REM