ITech IT-M3100 - System:communicate:lan:current:dgateway <SPD; System:communicate:lan:current:smask <SPD

System Commands
Copyright © Itech Electronic Co., Ltd. 43
Arguments
"<0-255>,<0-255>,<0-255>,<0-255>"
Default value
Not applicable
Example
SYST:COMM:LAN:CURR:ADDR “192.168.0.201”
Query command
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
Returns
<SRD>
SYSTem:COMMunicate:LAN:CURRent:DGATeway
<SPD>
This command sets the gateway of the power supply.
Syntax
SYSTem:COMMunicate:LAN:CURRent:DGATeway <SPD>
Arguments
"<0-255>,<0-255>,<0-255>,<0-255>"
Default value
Not applicable
Example
SYST:COMM:LAN:CURR:DGAT “192.168.0.1”
Query command
SYSTem:COMMunicate:LAN:CURRent:DGATeway?
Returns
<SRD>
SYSTem:COMMunicate:LAN:CURRent:SMASk <SPD>
This command sets the subnet mask of the power supply.
Syntax
SYSTem:COMMunicate:LAN:CURRent:SMASk <SPD>