ITech IT-M3100 - [Source:]Voltage:slew:positive <Nrf; [Source:]Voltage[:Over]:Protection[:Level] <Nrf

Source Commands
Copyright © Itech Electronic Co., Ltd. 27
Arguments
<0.025-9.999>
Default value
0.100S
Example
VOLT:SLEW:NEG 0.03
Query command
[SOURce:]VOLTage:SLEW:NEGative? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage:SLEW:POSitive <NRf+>
This command sets the voltage rising slew rate of the power supply.
Syntax
[SOURce:]VOLTage:SLEW:POSitive <NRf+>
Arguments
<0.025-9.999>
Default value
0.025S
Example
VOLT:SLEW:POS 0.03
Query command
[SOURce:]VOLTage:SLEW:POSitive? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel]
<NRf+>
This command sets the over-voltage limit of the power supply.
Syntax
[SOURce:]VOLTage[:OVER]:PROTection[:LEVel] <NRf+>