ITech IT-M3100 - Status:operation:enable <NR1; Status:operation:ntransition <NR1

Status Commands
Copyright © Itech Electronic Co., Ltd. 73
STATus:OPERation:ENABle <NR1>
This command sets the Operation Event Enable Register of the status model.
Syntax
STATus:OPERation:ENABle <NR1>
Arguments
<0 to 65535>
Default value
Not applicable
Example
STAT:OPER:ENAB 16
Query command
STATus:OPERation:ENABle?
Returns
NR1
STATus:OPERation:NTRansition <NR1>
This command sets the negative value of the Operation Event Register.
Syntax
STATus:OPERation:NTRansition <NR1>
Arguments
<0 to 65535>
Default value
Not applicable
Example
STAT:OPER:NTR 16
Query command
STATus:OPERation:NTRansition?
Returns
NR1