ITech IT-M3100 - Chapter12 Parallel Commands; Parallel:role <Single|Slave|Master; Parallel:group <NR1

Parallel Commands
Copyright © Itech Electronic Co., Ltd. 68
Chapter12 Parallel Commands
PARallel:ROLE <SINGle|SLAVe|MASTer>
This command sets the power supply to single, slave or master mode in the
parallel operation.
Syntax
PARallel:ROLE <SINGle|SLAVe|MASTer>
Arguments
<CPD> SINGle|SLAVe|MASTer
Default value
Not applicable
Example
PAR:ROLE SLAV
Query command
PARallel:ROLE?
Returns
SINGle|SLAVe|MASTer
PARallel:GROup <NR1>
This command specifies the parallel group.
Syntax
PARallel:GROup <NR1>
Arguments
<A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P>
Default value
Not applicable
Example
PAR:GRO A