Itotec SC115Z - How to Adjust the Backgauge Accelaration

5
Select the manual mode.
Press sub mode menu 【 Set 】 .
Press 【 Set backgauge accelaration 】 .
Standard setting ： 3 for each.
Press 【 Exit 】 .
Ｏｐｅｒａｔｉｏｎ
Press Option-key.
Adjust the accelaration or decelaration using 【 ▲ 】 【 ▼ 】 .
Ｈｏｗ ｔｏ ａｄｊｕｓｔ ｔｈｅ ｂａｃｋｇａｕｇｅ ａｃｃｅｌａｒａｔｉｏｎ
1.
2.
3.
4.
Too large an accelaration setting will cause the workpiece distanced from the
backgauge.
6.
１
４
５
６
5.
２
３
26