Itotec SC115Z - How to Replace the Cut-Line Bulb

5
Turn the power off.
Install the cover to the top of the main body.
Maintenance
Turn the lamp bulb counterclockwise and pull downward to remove.
Insert the new lamp bulb into the socket and turn clockwise to install.
Remove the cover from the top of the main body.
How to replace the cut-line bulb
1.
2.
3.
When riding on the surface plate, use non-slip shoes.
Otherwise you will fall or drop, suffering from injuries.
The lamp bulb may be hot immediately after it is blown out. Wait until it has cooled
down before touching.
Otherwise nurns will be caused.
5.
4.
３ ４
CAUTION
CAUTION
70