Itotec SC115Z - Otherwise Injuries will be Caused

5
the knife holders.
case, remove the knife handles.
How to change the knife
While holing the handles, fall the knife on the
leveling block.
Slightly loosen the knife handles and remove
While inserting the knife into the knife strage
When housing or retrieving the knife in/out
of the storage box, use the knife handle and
keep away from the cutting edge.
Otherwise injuries will be caused with the
cutting edge.
Fix the knife in the storage box with bolts or
rope securely so that the knife will not slide.
Otherwise injuries will be caused.
How to remove the knife (Knife lifter） 3
13.
14.
15.
When removing or installing the holder or hadle
fro /to the knife, be careful of the cutting
edge of the knife.
Otherwise injuries will be caused.
To carry the knife, house the knife in the
storage box with the back of the knife
facing down and be carefull of the cutting
edge.
Otherwise injuries will be caudsed due to the
sliding knife. As well, the storage box can be
broken and cause injuries.
When placing the knife on the surface plate
Do not allow the cutting edge protruding
from the surface plate.
Otherwise injuries will be caused with cutting
edge.
15
15
14
14
13
13
14
14
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
Replace the knife storage box or tying strings
with new ones immediately if they have
deteriorated
43