Itotec SC115Z - Lubrication and grease up

5
Maintenance
Lubrication and grease up
When conducting inspection, maintenance or repairs, turn the power off, post " work
under way ", post supporting workers and take other measures so that another person
will not turn the power on or start operation.
The flywheel, pump pulley, V-belt and main motor pulley keep rotating due to inertia for
about 150 seconds after the main motor is stopped. Check for stoppage befor
continuing to work.
When supplying grease to the clamp chain, wear non-slippery shoes and gloves. Use a
brush or the like to apply grease.
Otherwise you will drop from the sauface plate or touch edge of the machine
The oil amount and frequency vary according to the operating satae of the machine.
While inspecting the state of oil film, adjust the amount and lubrication period.
Grease once a year
Grease once a month
Machine oil
M
G
A
B
E
J
K
E
B
C
M
F
G
I I
Flywheel shaft support
Remove the cover and pour grease.
Clamp chain
Remove the cover and apply grease with a brush
once a day
once a week
Capacity ０．１６ lit.
Varies according to the model.
Central lubrication in some cases.
Take care of the oil amount.
Grease overflowing on the
face of the knife may cause
stain on the product.
once a week
once a week
CAUTION
84