Itotec SC115Z - How to Replace the Battery for Data Storage

5
Order us for battery replacement.
Maintenance
The battery for backing up data is built in the internal side face of the comuter box.
If the battery voltage is low, an alarm message is displayed on the touch panel display.
『 PLC battery voltage is low 』
If the message is displayed, contact us immediately.
It is recommended to replace every about 5 years in case of regular operation.
How to replace the battery for date storage
1.
2.
3.
Do not leave the message displayed.
If the battery is completely discharged, installation of the system program will
become necessary.
CAUTION
71