④ The cutting torque seems smaller.
Life span of lining.
Plce an order with our service division.
against the main body of the electromagnet. As well, an increases gap during
smaller while the gap during release becomes larger. A reduced gap during suction
Symtoms caused by worn lining.
Professional knowledge is necessary for inspection and adjustment of the clutch.
Inspection and adjustment of lining.
① The knife is stopped after it has passed the top.
The thickness of the adjusting nut is 24mm, including the lining. Rrplace the adjusting nut
deteriorates the sucking performance, making it impossible to suck the amature. Periodic
inspection and adjkustment are essential.
② The clutch operation noise becomes larger.
③ Abnormal noises are issued during knife operation.
including the lining if the thickness is 21.5mm.
The clutch lining becomes worn as operation continues. As the lining is worn, the
gap between amature and clutch magnet produced during clutch suction becomes
deteriotares the amature opening and , if gap is eliminated, the rotating amature
makes contact with the main body of the electromagnet, issuing abnormal noises.
If operation continues without adjustment, the amature will suffer from seizure
To Next Page
Loading...
