Related
Documentation
Configuring Dynamic Client Reconfiguration of Extended Local Server Clients on page 114•
• clear-on-abort on page 158
Configuring Reconfiguration of the Client on Receipt of RADIUS-Initiated Disconnect
You can configure the local server to reconfigure the client when the client receives a
RADIUS-initiated disconnect. By default, the client is deleted when a RADIUS-initiated
disconnect is received.
(Optional) To configure the DHCP local server to reconfigure the client instead of deleting
the client when a RADIUS-initiated disconnect is received, for all clients:
•
Specify the RADIUS-initiated disconnect trigger.
For DHCPv4:
[edit system services dhcp-local-server reconfigure trigger]
user@host# set radius-disconnect
For DHCPv6:
[edit system services dhcp-local-server dhcpv6 reconfigure trigger]
user@host# set radius-disconnect
To override the global configuration for a particular group of clients, include the statement
at the [edit system services dhcp-local-server group group-name reconfigure trigger]
hierarchy level or the [edit system services dhcpv6 dhcp-local-server group group-name
reconfigure trigger] hierarchy level.
Related
Documentation
• Configuring Dynamic Client Reconfiguration of Extended Local Server Clients on page 114
• radius-disconnect on page 266
• trigger on page 307
119Copyright © 2017, Juniper Networks, Inc.
Chapter 9: Forcing Dynamic Reconfiguration of Clients from a DHCP Local Server
To Next Page
Loading...
