EasyManuals Logo

Juniper EX3400 Features Guide

Juniper EX3400
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #434 background imageLoading...
Page #434 background image
show route extensive
List of Syntax Syntax on page 414
Syntax (EX Series Switches) on page 414
Syntax show route extensive
<destination-prefix>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route extensive
<destination-prefix>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display extensive information about the active entries in the routing tables.
Options none—Display all active entries in the routing table.
destination-prefix—(Optional) Display active entries for the specified address or range
of addresses.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show route extensive on page 421
show route extensive (Access Route) on page 428
show route extensive (BGP PIC Edge) on page 428
show route extensive (FRR and LFA) on page 429
show route extensive (IS-IS) on page 430
show route extensive (Route Reflector) on page 430
show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint
LSPs) on page 430
show route label detail (Multipoint LDP with Multicast-Only Fast Reroute) on page 431
Output Fields Table 25 on page 414 describes the output fields for the show route extensive command.
Output fields are listed in the approximate order in which they appear.
Table 25: show route extensive Output Fields
Field DescriptionField Name
Name of the routing table (for example, inet.0).routing-table-name
Number of destinations for which there are routes in the routing table.number destinations
Copyright © 2017, Juniper Networks, Inc.414
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Table of Contents

Other manuals for Juniper EX3400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3400 and is the answer not in the manual?

Juniper EX3400 Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
SafetyUL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor1U
Product colorBlack
Electromagnetic compatibilityFCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity4
QSFP+ module slots quantity2
Installed SFP+ modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity48
Memory typeDRAM
Noise level35 dB
Flash memory2000 MB
Processor frequency1000 MHz
Virtual stacking (units)10
Throughput250 Mpps
Jumbo frames9216
MAC address table32000 entries
Number of VLANs4093
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN featuresPort-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)120 W
Number of power supply units1
Operating altitude0 - 3048 m
Non-operating altitude3048 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
DHCP featuresDHCP server, DHCP client
AuthenticationMAC-based authentication, Port-based authentication
Security algorithms802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology1000BASE-X
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width437 mm
Height44 mm
Weight5740 g

Related product manuals