EasyManuals Logo

Juniper EX3400 Features Guide

Juniper EX3400
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #370 background imageLoading...
Page #370 background image
clear dhcpv6 relay binding
Syntax clear dhcpv6 relay binding
<address>
<all>
<dual-stack>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Release Information Command introduced in Junos OS Release 11.4.
Command introduced in Junos OS Release 12.3R2 for EX Series switches.
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Routers.
Option dual-stack added in Junos OS Release 15.1.
Description Clear the binding state of Dynamic Host Configuration Protocol for IPv6 (DHCPv6) clients
from the client table.
Options address—(Optional) Clear the binding state for the DHCPv6 client, using one of the
following entries:
CIDThe specified Client ID (CID).
ipv6-prefixThe specified IPv6 prefix.
session-idThe specified session ID.
all—(Optional) Clear the binding state for all DHCPv6 clients.
dual-stack—(Optional) Clear the binding state for DHCPv6 clients and the associated
DHCPv4 bindings in the single-session DHCP dual stack. DHCPv4 clients created in
a DHCPv4-only stack are not affected.
interfaces-vlan—(Optional) Clear the binding state on the interface VLAN ID and S-VLAN
ID.
interfaces-wildcard—(Optional) The set of interfaces on which to clear bindings. This
option supports the use of the wildcard character (*).
interface interface-name—(Optional) Clear the binding state for DHCPv6 clients on the
specified interface.
logical-system logical-system-name—(Optional) Clear the binding state for DHCPv6
clients on the specified logical system.
routing-instance routing-instance-name—(Optional) Clear the binding state for DHCPv6
clients on the specified routing instance.
Copyright © 2017, Juniper Networks, Inc.350
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Table of Contents

Other manuals for Juniper EX3400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3400 and is the answer not in the manual?

Juniper EX3400 Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
SafetyUL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor1U
Product colorBlack
Electromagnetic compatibilityFCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity4
QSFP+ module slots quantity2
Installed SFP+ modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity48
Memory typeDRAM
Noise level35 dB
Flash memory2000 MB
Processor frequency1000 MHz
Virtual stacking (units)10
Throughput250 Mpps
Jumbo frames9216
MAC address table32000 entries
Number of VLANs4093
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN featuresPort-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)120 W
Number of power supply units1
Operating altitude0 - 3048 m
Non-operating altitude3048 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
DHCP featuresDHCP server, DHCP client
AuthenticationMAC-based authentication, Port-based authentication
Security algorithms802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology1000BASE-X
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width437 mm
Height44 mm
Weight5740 g

Related product manuals