Juniper EX3400

server-group
Syntax server-group {
server-group-name {
server-ip-address;
}
}
Hierarchy Level [edit forwarding-options dhcp-relay],
[edit forwarding-options dhcp-relay dhcpv6],
[edit logical-systems logical-system-name forwarding-options dhcp-relay],
[edit logical-systems logical-system-name forwarding-options dhcp-relay dhcpv6],
[edit logical-systems logical-system-name routing-instances routing-instance-name
forwarding-options dhcp-relay],
[edit logical-systems logical-system-name routing-instances routing-instance-name
forwarding-options dhcp-relay dhcpv6],
[edit routing-instances routing-instance-name forwarding-options dhcp-relay],
[edit routing-instances routing-instance-name forwarding-options dhcp-relay dhcpv6]
Release Information Statement introduced in Junos OS Release 8.3.
Support at the [edit ... dhcpv6] hierarchy levels introduced in Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Description Specify the name of a group of DHCP server addresses for use by the extended DHCP
relay agent. Use the statement at the [edit ... dhcpv6] hierarchy levels to configure DHCPv6
support.
Options server-group-name—Name of the group of DHCP or DHCPv6 server addresses.
server-ip-address—IP address of the DHCP server belonging to this named server group.
Use IPv6 addresses when configuring DHCPv6 support. You can configure a maximum
of five IP addresses in each named server group.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• dhcp-relay on page 174
• Extended DHCP Relay Agent Overview on page 46
• Configuring Named Server Groups on page 79
287Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)