Juniper EX3400

preference (Subscriber Management)
Syntax preference route-distance
Hierarchy Level [edit dynamic-profiles profile-name routing-instances $junos-routing-instance routing-options
access route prefix],
[edit dynamic-profiles profile-name routing-instances $junos-routing-instancerouting-options
rib routing-table-name access route prefix],
[edit dynamic-profiles profile-name routing-options access route prefix]
Release Information Statement introduced in Junos OS Release 9.5.
Support at [edit dynamic-profiles profile-name routing-instances $junos-routing-instance
routing-options access route prefix] and [edit dynamic-profiles profile-name
routing-instances $junos-routing-instance routing-options rib routing-table-name access
route prefix] hierarchy levels introduced in Junos OS Release 10.1.
Description Dynamically configure the distance for an access route.
Options route-distance—Either the specific distance you want to assign to the access route or
either of the following distance variables:
• $junos-framed-route-distance—Distance of an IPv4 access route; the variable is
dynamically replaced with the preference value (Subattribute 5) from the RADIUS
Framed-Route attribute [22].
• $junos-framed-route-ipv6-distance—Distance of an IPv6 access route; the variable is
dynamically replaced with the preference value (Subattribute 5) from the RADIUS
Framed-IPv6-Route attribute [99].
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring Dynamic Access Routes for Subscriber Management
261Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)