Juniper EX3400 Features Guide

Related
Documentation
Clearing DHCP Bindings for Subscriber Access•
• clear dhcpv6 server binding on page 353
List of Sample Output show dhcpv6 server binding on page 404
show dhcpv6 server binding detail on page 404
show dhcpv6 server binding interface on page 404
show dhcpv6 server binding interface detail on page 404
show dhcpv6 server binding (IPv6 Prefix) on page 405
show dhcpv6 server binding (Session ID) on page 405
show dhcpv6 server binding (Interfaces VLAN) on page 405
show dhcpv6 server binding (Interfaces Wildcard) on page 405
show dhcpv6 server binding (Interfaces Wildcard) on page 406
show dhcpv6 server binding summary on page 406
Output Fields Table 22 on page 402 lists the output fields for the show dhcpv6 server binding command.
Output fields are listed in the approximate order in which they appear.
Table 22: show dhcpv6 server binding Output Fields
Level of OutputField DescriptionField Name
summarySummary counts of the total number of DHCPv6 clients and the number of
DHCPv6 clients in each state.
number clients,
(number init,
number bound,
number selecting,
number requesting,
number renewing,
number releasing)
brief detailClient’s DHCPv6 prefix, or prefix used to support multiple address assignment.Prefix
brief detailSession ID of the subscriber session.Session Id
brief detailNumber of seconds in which lease expires.Expires
brief detailState of the address binding table on the extended DHCPv6 local server:
• BOUND—Client has active IP address lease.
• INIT—Initial state.
• RECONFIGURE—Server has sent reconfigure message to client.
• RELEASE—Client is releasing IP address lease.
• RENEWING—Client sending request to renew IP address lease.
• REQUESTING—Client requesting a DHCPv6 server.
• SELECTING—Client receiving offers from DHCPv6 servers.
State
briefInterface on which the DHCPv6 request was received.Interface
detailClient’s IPv6 address.Client IPv6 Address
detailClient’s IPv6 prefix.Client IPv6 Prefix
Copyright © 2017, Juniper Networks, Inc.402
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Juniper EX3400 Specifications

General

Switch type	Managed
Switch layer	L2/L3
Quality of Service (QoS) support	Yes
Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity	4
QSFP+ module slots quantity	2
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Memory type	DRAM
Noise level	35 dB
Flash memory	2000 MB
Processor frequency	1000 MHz
Virtual stacking (units)	10
Throughput	250 Mpps
Jumbo frames	9216
MAC address table	32000 entries
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)	120 W
Number of power supply units	1
Operating altitude	0 - 3048 m
Non-operating altitude	3048 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X

Weight and Dimensions

Depth	350 mm
Width	437 mm
Height	44 mm
Weight	5740 g