Juniper EX3400

include-irb-and-l2
Syntax include-irb-and-l2;
Hierarchy Level [edit forwarding-options dhcp-relay dhcpv6 (relay-agent-interface-id |
relay-agent-remote-id)],
[edit forwarding-options dhcp-relay dhcpv6 group group-name (relay-agent-interface-id |
relay-agent-remote-id)],
[edit forwarding-options dhcp-relay relay-option-82 (circuit-id | remote-id)],
[edit forwarding-options dhcp-relay group group-name relay-option-82 (circuit-id |
remote-id)],
[edit logical-systems logical-system-name ... forwarding-options dhcp-relay dhcpv6
(relay-agent-interface-id | relay-agent-remote-id)],
[edit logical-systems logical-system-name ... forwarding-options dhcp-relay ... relay-option-82
(circuit-id | remote-id)],
[edit routing-instances routing-instance-name forwarding-options dhcp-relay dhcpv6
(relay-agent-interface-id | relay-agent-remote-id)],
[edit routing-instances routing-instance-name forwarding-options dhcp-relay ...
relay-option-82 (circuit-id | remote-id)],
[edit vlans vlan-name forwarding-options dhcp-security dhcpv6-options option-18],
[edit vlans vlan-name forwarding-options dhcp-security dhcpv6-options option-37]
Release Information Statement introduced in Junos OS Release 14.1.
NOTE: The EX Series switches that support the include-irb-and-l2 statement
are the EX4300, EX4600, and EX9200 switches.
Description Include both the integrated routing and bridging (IRB) interface name and Layer 2 interface
name in the circuit-id or remote-id value in the DHCP option 82 information. VLAN tags
are global.
When you configure the include-irb-and-l2 statement without including the
no-vlan-interface statement, the format is as follows:
• Bridge domain:
(fe | ge)-fpc/pic/port.subunit:bridge-domain-name+irb.subunit
• VLAN:
(fe | ge)-fpc/pic/port.subunit:vlan-name+irb.subunit
NOTE: For remote systems, the subunit is required and is used to differentiate
an interface.
Copyright © 2017, Juniper Networks, Inc.212
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches