Juniper EX3400

threshold (transmit-interval)
Syntax threshold milliseconds;
Hierarchy Level [edit system services dhcp-local-server liveness-detection method bfd transmit-interval],
[edit system services dhcp-local-server dhcpv6 liveness-detection method bfd
transmit-interval],
[edit forwarding-options dhcp-relay liveness-detection method bfd transmit-interval],
[edit forwarding-options dhcp-relay dhcpv6 liveness-detection method bfd transmit-interval],
[edit system services dhcp-local-server group group-name liveness-detection method bfd
transmit-interval],
[edit system services dhcp-local-server dhcpv6 group group-name liveness-detection method
bfd transmit-interval],
[edit forwarding-options dhcp-relay group group-name liveness-detection method bfd
transmit-interval],
[edit forwarding-options dhcp-relay dhcpv6 group group-name liveness-detection method
bfd transmit-interval]
Release Information Statement introduced in Junos OS Release 12.1.
Description Specify the threshold for detecting the adaptation of the transmit interval. When the
BFD session transmit interval adapts to a value greater than the threshold, a single trap
and a single system message are sent.
Options milliseconds — Threshold value.
Range: 0 through 4,294,967,295 (2
32
– 1)
NOTE: The threshold value specified in the threshold statement must be
greater than the value specified in the minimum-interval statement for
the transmit-interval statement.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring Group Liveness Detection for DHCP Local Server Clients
• Example: Configuring Global Liveness Detection for DHCP Relay Agent Clients
297Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)