Juniper EX3400 Features Guide

show dhcp server binding
Syntax show dhcp server binding
<address>
<interfaces-vlan><brief | detail | summary>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Release Information Command introduced in Junos OS Release 9.0.
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Description Display the address bindings in the client table on the extended Dynamic Host
Configuration Protocol (DHCP) local server.
NOTE: If you delete the DHCP server configuration, DHCP server bindings
might still remain. To ensure that DHCP bindings are removed, issue the clear
dhcp server binding command before you delete the DHCP server configuration.
Options address—(Optional) Display DHCP binding information for a specific client identified by
one of the following entries:
• ip-address—The specified IP address.
• mac-address—The specified MAC address.
• session-id—The specified session ID.
brief | detail | summary—(Optional) Display the specified level of output about active
client bindings. The default is brief, which produces the same output as show dhcp
server binding.
interface interface-name—(Optional) Display information about active client bindings
on the specified interface. You can optionally filter on VLAN ID and SVLAN ID.
interfaces-vlan—(Optional) Show the binding state information on the interface VLAN
ID and S-VLAN ID.
interfaces-wildcard—(Optional) The set of interfaces on which to show the binding state
information. This option supports the use of the wildcard character (*).
logical-system logical-system-name—(Optional) Display information about active client
bindings for DHCP clients on the specified logical system.
routing-instance routing-instance-name—(Optional) Display information about active
client bindings for DHCP clients on the specified routing instance.
Copyright © 2017, Juniper Networks, Inc.378
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Juniper EX3400 Specifications

General

Switch type	Managed
Switch layer	L2/L3
Quality of Service (QoS) support	Yes
Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity	4
QSFP+ module slots quantity	2
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Memory type	DRAM
Noise level	35 dB
Flash memory	2000 MB
Processor frequency	1000 MHz
Virtual stacking (units)	10
Throughput	250 Mpps
Jumbo frames	9216
MAC address table	32000 entries
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)	120 W
Number of power supply units	1
Operating altitude	0 - 3048 m
Non-operating altitude	3048 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X

Weight and Dimensions

Depth	350 mm
Width	437 mm
Height	44 mm
Weight	5740 g