show dhcpv6 server statistics
Syntax show dhcpv6 server statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Release Information Command introduced in Junos OS Release 9.6.
bulk-leasequery-connections option introduced in Junos OS Release 16.1.
Description Display extended Dynamic Host Configuration Protocol for IPv6 (DHCPv6) local server
statistics.
Options bulk-leasequery-connections—(Optional) Display bulk leasequery statistics.
logical-system logical-system-name—(Optional) Display information about extended
DHCPv6 local server statistics on the specified logical system. If you do not specify
a logical system, statistics are displayed for the default logical system.
routing-instance routing-instance-name—(Optional) Display information about extended
DHCPv6 local server statistics on the specified routing instance. If you do not specify
a routing instance, statistics are displayed for the default routing instance.
Required Privilege
Level
view
Related
Documentation
clear dhcpv6 server statistics on page 358•
List of Sample Output show dhcpv6 server statistics on page 413
show dhcpv6 server statistics bulk-leasequery-connections on page 413
Output Fields Table 24 on page 412 lists the output fields for the show dhcpv6 server statistics command.
Output fields are listed in the approximate order in which they appear.
411Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)