Juniper EX3400 Features Guide

service-profile (DHCP Relay Agent)
Syntax service-profile dynamic-profile-name;
Hierarchy Level [edit forwarding-options dhcp-relay],
[edit forwarding-options dhcp-relay dhcpv6],
[edit forwarding-options dhcp-relay dual-stack-group dual-stack-group-name],
[edit forwarding-options dhcp-relay group group-name],
[edit forwarding-options dhcp-relay group group-name interface interface-name],
[edit forwarding-options dhcp-relay dhcpv6 groupgroup-name],
[edit forwarding-options dhcp-relay dhcpv6 group group-name interface interface-name],
[edit logical-systems logical-system-name forwarding-options dhcp-relay ...],
[edit logical-systems logical-system-name routing-instances routing-instance-name
forwarding-options dhcp-relay ...],
[edit routing-instances routing-instance-name forwarding-options dhcp-relay ...]
Release Information Statement introduced in Junos OS Release 11.2.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Support at the [edit ... dhcpv6 ...] hierarchy levels introduced in Junos OS Release 11.4.
Support at the [edit ... dual-stack-group dual-stack-group-name] hierarchy level introduced
in Junos OS Release 15.1.
Description Specify the default subscriber service (or the default DHCP client management service),
which is activated when the subscriber (or client) logs in and no other service is activated
by a RADIUS server or a provisioning server.
• To specify the default service for all DHCP relay agent clients, include the service-profile
statement at the [edit forwarding-options dhcp relay] hierarchy level.
• To specify the default service for a named group of interfaces, include the service-profile
statement at the [editforwarding-options dhcp relay group group-name] hierarchy level.
• To specify the default service for a particular interface within a named group of
interfaces, include the service-profile statement at the [edit forwarding-options dhcp
relay group group-name interface interface-name] hierarchy level.
Options dynamic-profile-name—Name of the dynamic profile.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• dhcp-relay on page 174
• Attaching Dynamic Profiles to DHCP Subscriber Interfaces or DHCP Client Interfaces
• Grouping Interfaces with Common DHCP Configurations on page 89
• Default Subscriber Service Overview
• Configuring a Default Subscriber Service
Copyright © 2017, Juniper Networks, Inc.290
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Juniper EX3400 Specifications

General

Switch type	Managed
Switch layer	L2/L3
Quality of Service (QoS) support	Yes
Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity	4
QSFP+ module slots quantity	2
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Memory type	DRAM
Noise level	35 dB
Flash memory	2000 MB
Processor frequency	1000 MHz
Virtual stacking (units)	10
Throughput	250 Mpps
Jumbo frames	9216
MAC address table	32000 entries
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)	120 W
Number of power supply units	1
Operating altitude	0 - 3048 m
Non-operating altitude	3048 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X

Weight and Dimensions

Depth	350 mm
Width	437 mm
Height	44 mm
Weight	5740 g