Juniper EX3400 Features Guide

use-primary (DHCP Local Server)
Syntax use-primary primary-profile-name;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server dynamic-profile profile-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server group group-name dynamic-profile profile-name],
[edit logical-systems logical-system-name system services dhcp-local-server dynamic-profile
profile-name],
[edit logical-systems logical-system-name system services dhcp-local-server group
group-name dynamic-profile profile-name],
[edit routing-instances routing-instance-name system services dhcp-local-server
dynamic-profile profile-name],
[edit routing-instances routing-instance-name system services dhcp-local-server group
group-name dynamic-profile profile-name],
[edit system services dhcp-local-server dynamic-profile profile-name],
[edit system services dhcp-local-server group group-name dynamic-profile profile-name]
Release Information Statement introduced in Junos OS Release 9.3.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Description Specify the dynamic profile to configure as the primary dynamic profile. The primary
dynamic profile is instantiated when the first subscriber or DHCP client logs in. Subsequent
subscribers (or clients) are not assigned the primary dynamic profile; instead, they are
assigned the dynamic profile specified for the interface. When the first subscriber (or
client) logs out, the next subscriber (or client) that logs in is assigned the primary dynamic
profile.
Options primary-profile-name—Name of the dynamic profile to configure as the primary dynamic
profile
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
• Attaching Dynamic Profiles to DHCP Subscriber Interfaces or DHCP Client Interfaces
311Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)

Juniper EX3400 Specifications

General

Switch type	Managed
Switch layer	L2/L3
Quality of Service (QoS) support	Yes
Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity	4
QSFP+ module slots quantity	2
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Memory type	DRAM
Noise level	35 dB
Flash memory	2000 MB
Processor frequency	1000 MHz
Virtual stacking (units)	10
Throughput	250 Mpps
Jumbo frames	9216
MAC address table	32000 entries
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)	120 W
Number of power supply units	1
Operating altitude	0 - 3048 m
Non-operating altitude	3048 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X

Weight and Dimensions

Depth	350 mm
Width	437 mm
Height	44 mm
Weight	5740 g