show dhcpv6 relay statistics
Syntax show dhcpv6 relay statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Release Information Command introduced in Junos OS Release 11.4.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Switches.
Command introduced in Junos OS Release 12.3R2 for EX Series switches.
bulk-leasequery-connections option introduced in Junos OS Release 16.1.
Description Display Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay statistics.
Options bulk-leasequery-connections—(Optional) Display bulk leasequery statistics.
logical-system logical-system-name—(Optional) Perform this operation on the specified
logical system. If you do not specify a logical system name, statistics are displayed
for the default logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance. If you do not specify a routing instance name, statistics
are displayed for the default routing instance.
Required Privilege
Level
view
Related
Documentation
clear dhcpv6 relay statistics on page 356•
List of Sample Output show dhcpv6 relay statistics on page 409
show dhcpv6 relay statistics bulk-leasequery-connections on page 410
Output Fields Table 23 on page 408 lists the output fields for the show dhcpv6 relay statistics command.
Output fields are listed in the approximate order in which they appear.
407Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)