Juniper EX3400

allow-no-end-option (DHCP Relay Agent)
Syntax allow-no-end-option;
Hierarchy Level [edit forwarding-options dhcp-relay overrides],
[edit forwarding-options dhcp-relay group group-name overrides],
[edit forwarding-options dhcp-relay group group-name interface interface-name overrides],
[edit routing-instances routing-instance-name forwarding-options dhcp-relay ...]
Release Information Statement introduced in Junos OS Release 14.1X53.
Description Enable a DHCP relay agent to process packets sent from clients without DHCP Option-255
(end-of-options).
The default behavior in Junos OS is to drop packets that do not include Option 255. To
override this default behavior, configure the allow-no-end-option CLI statement at the
[edit forwarding-options dhcp-relay overrides] hierarchy level.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Extended DHCP Relay Agent Overview on page 46
• Overriding the Default DHCP Relay Configuration Settings on page 68
• DHCP Snooping Support
145Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)