Juniper EX3400 - Chapter 12 Configuration Statements (DHCP and DHCP Relay)

CHAPTER 12
Configuration Statements (DHCP and
DHCP Relay)
•
access (Dynamic Access Routes) on page 141
•
access-internal (Dynamic Access-Internal Routes) on page 142
•
active-server-group on page 144
•
allow-no-end-option (DHCP Relay Agent) on page 145
•
allow-snooped-clients on page 146
•
always-write-giaddr on page 147
•
always-write-option-82 on page 148
•
attempts (DHCP Local Server) on page 149
•
authentication (DHCP Local Server) on page 150
•
authentication (DHCP Relay Agent) on page 151
•
bfd on page 152
•
circuit-id (DHCP Relay Agent) on page 153
•
circuit-type (DHCP Local Server) on page 156
•
circuit-type (DHCP Relay Agent) on page 157
•
clear-on-abort (DHCP Local Server) on page 158
•
client-discover-match (DHCP Local Server) on page 159
•
client-id (DHCP Local Server) on page 160
•
client-id (DHCP Relay Agent) on page 161
•
delegated-pool (DHCP Local Server) on page 162
•
delimiter (DHCP Local Server) on page 163
•
delimiter (DHCP Relay Agent) on page 165
•
detection-time on page 166
•
dhcp (DHCP Client) on page 167
•
dhcp-local-server on page 168
•
dhcp-relay on page 174
•
dhcpv6 (DHCP Local Server) on page 183
137Copyright © 2017, Juniper Networks, Inc.