Juniper EX3400

Table 24: show dhcpv6 server statistics Output Fields
Field DescriptionField Name
Number of packets discarded by the extended DHCPv6 local server because of errors. Only nonzero
statistics appear in the Packets dropped output. When all of the Packets dropped statistics are 0
(zero), only the Total field appears.
• Total—Total number of packets discarded by the extended DHCPv6 local server
• Strict Reconfigure—Number of solicit messages discarded because the client does not support
reconfiguration
• Bad hardware address—Number of packets discarded because an invalid hardware address was
specified
• Bad opcode—Number of packets discarded because an invalid operation code was specified
• Bad options—Number of packets discarded because invalid options were specified
• Invalid server address—Number of packets discarded because an invalid server address was specified
• Lease Time Violation—Number of packets discarded because of a lease time violation
• No available addresses—Number of packets discarded because there were no addresses available
for assignment
• No interface match—Number of packets discarded because they did not belong to a configured
interface
• No routing instance match—Number of packets discarded because they did not belong to a configured
routing instance
• No valid local address—Number of packets discarded because there was no valid local address
• Packet too short—Number of packets discarded because they were too short
• Read error—Number of packets discarded because of a system read error
• Send error—Number of packets that the extended DHCPv6 local server could not send
Packets dropped
Number of DHCPv6 messages received.
• DHCPV6_CONFIRM—Number of DHCPv6 CONFIRM PDUs received.
• DHCPV6_DECLINE—Number of DHCPv6 DECLINE PDUs received.
• DHCPV6_INFORMATION_REQUEST—Number of DHCPv6 INFORMATION-REQUEST PDUs received.
• DHCPV6_REBIND—Number of DHCPv6 REBIND PDUs received.
• DHCPV6_RELAY_FORW—Number of DHCPv6 RELAY-FORW PDUs received.
• DHCPV6_RELAY_REPL—Number of DHCPv6 RELAY-REPL PDUs received.
• DHCPV6_RELEASE—Number of DHCPv6 RELEASE PDUs received.
• DHCPV6_RENEW—Number of DHCPv6 RENEW PDUs received.
• DHCPV6_REQUEST—Number of DHCPv6 REQUEST PDUs received.
• DHCPV6_SOLICIT—Number of DHCPv6 SOLICIT PDUs received.
• DHCPV6_LEASEQUERY—Number of DHCPv6 leasequery messages received.
Messages received
Copyright © 2017, Juniper Networks, Inc.412
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches