Juniper EX3400

Table 24: show dhcpv6 server statistics Output Fields (continued)
Field DescriptionField Name
Number of DHCPv6 messages sent.
• DHCPV6_ADVERTISE—Number of DHCPv6 ADVERTISE PDUs transmitted.
• DHCPV6_REPLY—Number of DHCPv6 ADVERTISE PDUs transmitted.
• DHCPV6_LOGICAL_NAK—Number of logical NAK messages sent, signifying T1 and T2 timers with
values of zero; subset of DHCPV6_REPLY counter. (Displays only at verbose level.
• DHC6_RECONFIGURE—Number of DHCPv6 RECONFIGURE PDUs transmitted.
• DHCPV6_LEASEQUERY_REPLY—Number of DHCPv6 leasequery replies transmitted to the DHCPv6
relay agent.
• DHCPV6_LEASEQUERY_DATA—Number of DHCPv6 LEASEQUERY-DATA packets transmitted.
• DHCPV6_LEASEQUERY_DONE—Number of DHCPv6 LEASEQUERY-DONE packets sent.
Messages sent
Sample Output
show dhcpv6 server statistics
user@host> show dhcpv6 server statistics
Dhcpv6 Packets dropped:
Total 1
Lease Time Violation 1
Messages received:
DHCPV6_DECLINE 0
DHCPV6_SOLICIT 9
DHCPV6_INFORMATION_REQUEST 0
DHCPV6_RELEASE 0
DHCPV6_REQUEST 5
DHCPV6_CONFIRM 0
DHCPV6_RENEW 0
DHCPV6_REBIND 0
DHCPV6_RELAY_FORW 0
DHCPV6_RELAY_REPL 0
DHCPV^_LEASEQUERY 0
Messages sent:
DHCPV6_ADVERTISE 9
DHCPV6_REPLY 5
DHCPV6_RECONFIGURE 0
DHCPV6_LEASEQUERY_REPLY 0
DHCPV6_LEASEQUERY_DATA 0
DHCPV6_LEASEQUERY_DONE 0
show dhcpv6 server statistics bulk-leasequery-connections
user@host> show dhcpv6 server statistics bulk-leasequery-connections
Total Accepted Connections: 0
Total Not-Accepted Connections: 0
Connections Closed due to Errors: 0
Connections Closed due to max-empty-replies: 0
In-flight Connections: 0
413Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)