Juniper EX3400

dhcpv6 (DHCP Relay Agent)
Syntax dhcpv6 {
access-profile profile-name;
active-server-group server-group-name;
}
authentication {
password password-string;
username-include {
circuit-type;
client-id;
delimiter delimiter-character;
domain-name domain-name-string;
interface-description (device-interface | logical-interface);
logical-system-name;
mac-address;
relay-agent-interface-id;
relay-agent-remote-id;
relay-agent-subscriber-id;
routing-instance-name;
user-prefix user-prefix-string;
}
}
bulk-leasequery {
attempts number-of-attempts;
timeout seconds;
trigger automatic;
}
duplicate-clients incoming-interface;
dynamic-profile profile-name {
aggregate-clients (merge | replace);
use-primary primary-profile-name;
}
forward-only {
logical-system <current | default | logical-system-name>;
routing-instance <current | default | routing-instance-name>;
}
forward-only-replies;
}
forward-snooped-clients (all-interfaces | configured-interfaces |
non-configured-interfaces);
group group-name {
access-profile profile-name;
active-server-group server-group-name;
authentication {
...
}
dual-stack-group dual-stack-group-name {
access-profile profile-name;
authentication {
... authentication-configuration
}
dynamic-profile profile-name {
... dynamic-profile-configuration
187Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)