Juniper EX3400

dynamic-profile (DHCP Local Server)
Syntax dynamic-profile profile-name {
aggregate-clients (merge | replace);
use-primary primary-profile-name;
}
Hierarchy Level [edit system services dhcp-local-server],
[edit system services dhcp-local-server dual-stack-group dual-stack-group-name],
[edit system services dhcp-local-server dhcpv6],
[edit system services dhcp-local-server dhcpv6 group group-name],
[edit system services dhcp-local-server dhcpv6 group group-name interface interface-name],
[edit system services dhcp-local-server group group-name],
[edit system services dhcp-local-server group group-name interface interface-name],
[edit logical-systems logical-system-name system services dhcp-local-server ...],
[edit logical-systems logical-system-name routing-instances routing-instance-name system
services dhcp-local-server ...],
[edit routing-instances routing-instance-name system services dhcp-local-server ...]
Release Information Statement introduced in Junos OS Release 9.2.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Options aggregate-clients and use-primary introduced in Junos OS Release 9.3.
Support at the [edit ... interface] hierarchy levels introduced in Junos OS Release 11.2.
Description Specify the dynamic profile that is attached to all interfaces, a named group of interfaces,
or a specific interface.
Options profile-name—Name of the dynamic profile.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
• Attaching Dynamic Profiles to DHCP Subscriber Interfaces or DHCP Client Interfaces
• Configuring a Default Subscriber Service
199Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)