Juniper EX3400

show system services dhcp statistics
Syntax show system services dhcp statistics
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description (J Series routers and EX Series switches only) Display Dynamic Host Configuration
Protocol (DHCP) server statistics.
Options This command has no options.
Required Privilege
Level
view and system
Related
Documentation
clear system services dhcp statistics on page 361•
List of Sample Output show system services dhcp statistics on page 455
Output Fields Table 30 on page 454 describes the output fields for the show system services dhcp
statistics command. Output fields are listed in the approximate order in which they
appear.
Table 30: show system services dhcp statistics Output Fields
Field DescriptionField Name
Lease time assigned to clients that do not request a specific lease time.Default lease time
Minimum time a client can retain an IP address lease on the server.Minimum lease time
Maximum time a client can retain an IP address lease on the server.Maximum lease time
Total number of packets dropped and number of packets dropped because of:
• Invalid hardware address
• Invalid opcode
• Invalid server address
• No available address
• No interface match
• No routing instance match
• No valid local addresses
• Packet too short
• Read error
• Send error
Packets dropped
Copyright © 2017, Juniper Networks, Inc.454
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches