Juniper EX3400 Features Guide

Table 25: show route extensive Output Fields (continued)
Field DescriptionField Name
Layer 2 VPN and VPLS network layer reachability information (NLRI).status vector
Local preference value included in the route.Localpref
BGP router ID as advertised by the neighbor in the open message.Router ID
In a routing table group, the name of the primary routing table in which the route resides.Primary Routing Table
In a routing table group, the name of one or more secondary tables in which the route resides.Secondary Tables
Name of the routing table whose active route was used to determine the forwarding next-hop entry
in the resolution database. For example, in the case of inet.0 resolving through inet.0 and inet.3, this
field indicates which routing table, inet.0 or inet.3, provided the best path for a particular prefix.
Originating RIB
Number of nodes in the path.Node path count
Number of forwarding next hops. The forwarding next hop is the network layer address of the directly
reachable neighboring system (if applicable) and the interface used to reach it.
Forwarding nexthops
Sample Output
show route extensive
user@host> show route extensive
inet.0: 22 destinations, 23 routes (21 active, 0 holddown, 1 hidden)
203.0.113.10/16 (1 entry, 1 announced)
TSI:
KRT in-kernel 203.0.113.10/16 -> {192.168.71.254}
*Static Preference: 5
Next-hop reference count: 29
Next hop: 192.168.71.254 via fxp0.0, selected
State: <Active NoReadvrt Int Ext>
Local AS: 64496
Age: 1:34:06
Task: RT
Announcement bits (2): 0-KRT 3-Resolve tree 2
AS path: I
203.0.113.30/30 (2 entries, 1 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 2
Next hop: via so-0/3/0.0, selected
State: <Active Int>
Local AS: 64496
Age: 1:32:40
Task: IF
Announcement bits (1): 3-Resolve tree 2
AS path: I
OSPF Preference: 10
Next-hop reference count: 1
Next hop: via so-0/3/0.0, selected
421Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)

Juniper EX3400 Specifications

General

Switch type	Managed
Switch layer	L2/L3
Quality of Service (QoS) support	Yes
Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity	4
QSFP+ module slots quantity	2
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Memory type	DRAM
Noise level	35 dB
Flash memory	2000 MB
Processor frequency	1000 MHz
Virtual stacking (units)	10
Throughput	250 Mpps
Jumbo frames	9216
MAC address table	32000 entries
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)	120 W
Number of power supply units	1
Operating altitude	0 - 3048 m
Non-operating altitude	3048 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X

Weight and Dimensions

Depth	350 mm
Width	437 mm
Height	44 mm
Weight	5740 g