Juniper EX3400

}
overrides {
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
interface-client-limit number;
multi-address-embedded-option-response;
process-inform {
pool pool-name;
}
protocol-attributes attribute-set-name;
rapid-commit;
}
service-profile dynamic-profile-name;
trace;
upto upto-interface-name;
}
overrides {
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
delegated-pool;
interface-client-limit number;
multi-address-embedded-option-response;
process-inform {
pool pool-name;
}
protocol-attributes attribute-set-name;
rapid-commit;
}
route-suppression;
server-duid-type type;
service-profile dynamic-profile-name;
}
liveness-detection {
failure-action (clear-binding | clear-binding-if-interface-up | log-only);
method {
bfd {
version (0 | 1 | automatic);
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
detection-time {
threshold milliseconds;
}
session-mode (automatic | multihop | singlehop);
holddown-interval milliseconds;
}
}
}
overrides {
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
169Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)