Juniper EX3400

session-mode (automatic | multihop | singlehop);
holddown-interval milliseconds;
}
}
}
overrides {
asymmetric-lease-time seconds;
client-discover-match (option60-and-option82 | incoming-interface);
include-option-82 {
forcerenew;
nak;
}
interface-client-limit number;
process-inform {
pool pool-name;
}
protocol-attributes attribute-set-name;
}
service-profile dynamic-profile-name;
trace;
upto upto-interface-name;
}
overrides {
asymmetric-lease-time seconds;
client-discover-match (option60-and-option82 | incoming-interface);
include-option-82 {
forcerenew;
nak;
}
interface-client-limit number;
process-inform {
pool pool-name;
}
protocol-attributes attribute-set-name;
}
requested-ip-network-match subnet-mask
route-suppression;
service-profile dynamic-profile-name;
}
liveness-detection {
failure-action (clear-binding | clear-binding-if-interface-up | log-only);
method {
bfd {
version (0 | 1 | automatic);
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
detection-time {
threshold milliseconds;
}
session-mode (automatic | multihop | singlehop);
171Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)