Juniper EX3400

use-primary primary-profile-name;
}
forward-only {
logical-system <current | default | logical-system-name>;
routing-instance <current | default | routing-instance-name>;
}
forward-only-replies;
}
forward-snooped-clients (all-interfaces | configured-interfaces |
non-configured-interfaces);
group group-name {
access-profile profile-name;
active-server-group server-group-name;
authentication {
...
}
dual-stack-group dual-stack-group-name {
access-profile profile-name;
authentication {
... authentication-configuration
}
dynamic-profile profile-name {
... dynamic-profile-configuration
}
relay-agent-interface-id {
... relay-agent-interface-id-configuration
}
relay-agent-remote-id {
... relay-agent-remote-id-configuration
}
service-profile dynamic-profile-name;
}
dynamic-profile profile-name {
...
}
forward-only {
logical-system <current | default | logical-system-name>;
routing-instance <current | default | routing-instance-name>;
}
interface interface-name {
access-profile profile-name;
dynamic-profile profile-name {
...
}
exclude;
overrides {
allow-snooped-clients;
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
client-negotiation-match incoming-interface;
delay-authentication;
delete-binding-on-renegotiation;
dual-stack dual-stack-group-name;
interface-client-limit number;
no-allow-snooped-clients;
no-bind-on-request;
175Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)