Juniper EX3400

}
relay-option {
option-number option-number;
default-action {
drop;
forward-only;
relay-server-group relay-server-group;
}
equals (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
relay-server-group relay-server-group;
}
starts-with (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
relay-server-group relay-server-group;
}
}
remote-id-mismatch action;
route-suppression;
service-profile dynamic-profile-name;
}
leasequery {
attempts number-of-attempts;
timeout seconds;
}
lease-time-validation {
lease-time-threshold seconds;
violation-action action;
}
liveness-detection {
failure-action (clear-binding | clear-binding-if-interface-up | log-only);
method {
bfd {
version (0 | 1 | automatic);
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
detection-time {
threshold milliseconds;
}
session-mode(automatic | multihop | singlehop);
holddown-interval milliseconds;
}
route-suppression;
service-profile dynamic-profile-name;
}
}
no-snoop;
overrides {
177Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)