Juniper EX3400

}
}
}
no-snoop;
overrides {
allow-no-end-option
allow-snooped-clients;
always-write-giaddr;
always-write-option-82;
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
client-discover-match (option60-and-option82 | incoming-interface);
delay-authentication;
delete-binding-on-renegotiation;
disable-relay;
dual-stack dual-stack-group-name;
interface-client-limit number;
layer2-unicast-replies;
no-allow-snooped-clients;
no-bind-on-request;
proxy-mode;
relay-source
replace-ip-source-with;
send-release-on-delete;
trust-option-82;
}
relay-option {
option-number option-number;
default-action {
drop;
forward-only;
relay-server-group group-name;
}
equals (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
relay-server-group relay-server-group;
}
starts-with (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
local-server-group local-server-group;
relay-server-group relay-server-group;
}
}
relay-option-82 {
circuit-id {
prefix prefix;
use-interface-description (logical | device);
}
remote-id {
prefix prefix;
use-interface-description (logical | device);
}
server-id-override
}
181Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)