Juniper EX3400

threshold milliseconds;
}
detection-time {
threshold milliseconds;
}
session-mode(automatic | multihop | singlehop);
holddown-interval milliseconds;
}
route-suppression;
service-profile dynamic-profile-name;
}
}
overrides {
allow-snooped-clients;
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
client-negotiation-match incoming-interface;
delay-authentication;
delete-binding-on-renegotiation;
dual-stack dual-stack-group-name;
interface-client-limit number;
no-allow-snooped-clients;
no-bind-on-request;
relay-source interface-name;
send-release-on-delete;
}
relay-agent-interface-id {
...
}
relay-agent-remote-id {
prefix prefix;
use-interface-description (logical | device);
use-option-82 <strict>;
}
relay-option {
option-number option-number;
default-action {
drop;
forward-only;
relay-server-group relay-server-group;
}
equals (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
relay-server-group relay-server-group;
}
starts-with (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
relay-server-group relay-server-group;
}
}
remote-id-mismatch action;
route-suppression;
service-profile dynamic-profile-name;
}
189Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)