Juniper EX3400

}
}
overrides {
...
}
service-profile dynamic-profile-name;
trace;
upto upto-interface-name;
}
overrides {
allow-snooped-clients;
always-write-giaddr;
always-write-option-82;
asymmetric-lease-time seconds;
asymmetric-prefix-lease-time seconds;
client-discover-match <option60-and-option82>;
client-negotiation-match incoming-interface;
disable-relay;
dual-stack dual-stack-group-name;
interface-client-limit number;
layer2-unicast-replies;
no-allow-snooped-clients;
no-bind-on-request;
proxy-mode;
relay-source
replace-ip-source-with;
send-release-on-delete;
trust-option-82;
}
relay-agent-interface-id {
prefix prefix;
use-interface-description (logical | device);
use-option-82;
}
relay-agent-remote-id {
prefix prefix;
use-interface-description (logical | device);
use-option-82 <strict>;
}
relay-option {
option-number option-number;
default-action {
drop;
forward-only;
local-server-group local-server-group;
relay-server-group relay-server-group;
}
equals (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
local-server-group local-server-group;
relay-server-group relay-server-group;
}
starts-with (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
209Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)