upto-interface-name—Upper end of the range of interfaces; the lower end of the range is
the interface-name entry. The interface device name of the upto-interface-name
must be the same as the device name of the interface-name.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Related
Documentation
• Extended DHCP Local Server Overview on page 22
• Grouping Interfaces with Common DHCP Configurations on page 89
• Using External AAA Authentication Services with DHCP on page 101
215Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Configuration Statements (DHCP and DHCP Relay)
To Next Page
Loading...
