Juniper EX3400

clear dhcp relay binding interface
The following command clears DHCP relay agent bindings on a specific interface:
user@host> clear dhcp relay binding interface fe-0/0/3
clear dhcp relay binding <interfaces-vlan>
The following command uses the interfaces-vlan option to clear all DHCP relay agent
bindings on top of the underlying interface ae0, which clears DHCP bindings on all demux
VLANs on top of ae0:
user@host> clear dhcp relay binding interface ae0
clear dhcp relay binding <interfaces-wildcard>
The following command uses the interfaces-wildcard option to clear all DHCP relay agent
bindings over a specific interface:
user@host> clear dhcp relay binding ge-1/0/0.*
341Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)